BowTie Home Services · Las Vegas, NV
Kitec Pipe Replacement in Las Vegas
We identify and replace Kitec plumbing in Las Vegas homes — the orange and blue plastic pipe whose brass fittings fail without warning in hard water. Full PEX-A repiping with flat-rate pricing.
Homeowner Reviews
Licensed & Insured
Nevada plumbing & HVAC
White Glove Guarantee
Every visit, every time
Upfront Pricing
No surprises, ever
Why Kitec Fails in Las Vegas
Kitec plumbing was installed in Las Vegas-area homes primarily between 1995 and 2007. It was marketed as a modern, flexible alternative to copper — less expensive and easier to install. The failure mode wasn't in the pipe itself. It was in the fittings.
Kitec fittings are brass, and they contain zinc at proportions that make them susceptible to dezincification — a process where zinc ions leach out of the alloy in hot, mineral-heavy water, leaving the fitting structurally weakened. Las Vegas is one of the worst environments in North America for this. The water is extremely hard (Colorado River sourced, 278–300 mg/L hardness), supply lines carry hot water at high temperature, and the water chemistry accelerates dezincification. Kitec failures don't always give visible warning — a fitting can look intact until it cracks suddenly under pressure.
The Kitec class action settlement fund provided compensation for affected homeowners, but the deadline to file claims was December 31, 2020. That fund is closed. If your home has Kitec, the decision now is whether to replace proactively or wait for failures.
How to identify Kitec: The pipe is typically orange (hot lines) or blue (cold lines). It may be labeled "Kitec," "PlumbBetter," "IPEX AQUA," or "AmbioComfort." Fittings are brass and noticeably oversized compared to copper fittings.
How We Handle It
We repipe Kitec homes with PEX-A, routed through walls and the attic to bypass the original line locations entirely. We don't replace Kitec fittings in isolation — the pipe and fittings come out together and are replaced as a complete system. Piecemeal fitting replacement is a temporary fix in a system under ongoing stress.
Both options — proactive full repipe vs. addressing failures as they occur — are explained with flat-rate pricing. We don't push one over the other.
- Full home repipe with PEX-A, replacing all Kitec pipe and fittings
- Attic-routed distribution bypasses slab and original line locations
- Visual inspection to confirm Kitec presence and scope before quoting
- Flat-rate pricing after on-site assessment
- Same-day service across Las Vegas
Signs Your Kitec May Be Failing
- Low or fluctuating water pressure throughout the house. Pressure problems that appear without explanation can indicate a slow fitting failure bleeding pressure.
- Discolored water, especially from hot lines. Green or brown-tinged hot water can signal dezincification byproducts leaching from the fittings.
- A fitting that has already failed. One Kitec fitting failure — at a water heater connection, appliance line, or fixture — means the rest are under the same stress.
- Green corrosion or white mineral crust around fittings. Visible corrosion at brass fittings is a direct indicator of dezincification in progress.
- Pipe labeled Kitec, PlumbBetter, or IPEX AQUA in utility spaces. Confirmed Kitec presence in a Las Vegas home built 1995–2007 warrants a professional assessment.
Kitec Pipe Questions for Las Vegas Homeowners
How do I tell if my home has Kitec pipe?
Look in your water heater closet or utility room. Kitec pipe is typically orange (hot lines) or blue (cold lines) — not gray like poly-B and not copper. Fittings are brass and noticeably larger than copper compression fittings. Common labels: “Kitec,” “PlumbBetter,” “IPEX AQUA,” or “AmbioComfort.” Homes built in Las Vegas between 1995 and 2007 are the likely candidates.
Is Kitec still safe to use while I decide what to do?
Many Kitec systems in Las Vegas are still functional. The risk is sudden fitting failure without visible warning signs beforehand. The urgency depends on how long the system has been in service and whether any fittings have already shown signs of stress. We can assess what you have and give you an honest picture.
Can individual Kitec fittings be replaced without a full repipe?
Technically yes — failed fittings can be replaced with compatible hardware. The problem is it treats a systemic issue one joint at a time. If your water chemistry is aggressive (as Las Vegas water is), every fitting is under the same stress. Replacing one failed fitting leaves the rest at elevated risk.
The settlement deadline passed — what are my options now?
The December 2020 Kitec claims deadline is closed. Your options are: proactive full repipe before a failure occurs, or waiting until a fitting fails and addressing it then. We help you evaluate the current state of your system and what each path looks like financially.
What's the difference between Kitec failure and poly-B failure?
Poly-B fails in the pipe material itself — the plastic becomes brittle over years. Kitec's primary failure mode is in the brass fittings — dezincification weakens the fitting until it cracks or separates under pressure. Both are Las Vegas repipe candidates; the mechanics differ.
How long does a Kitec repipe take?
A typical single-family home takes 2–3 days. Water is off during the workday and restored each evening. Drywall access is patched as part of the job.
How much does Kitec replacement cost in Las Vegas?
Cost scales with home size and fixture count. We provide flat-rate pricing after an on-site assessment. Call (725) 290-3207 to schedule.
Kitec fittings in Las Vegas hard water don't give much warning.
Call us to assess what you have and what the risk looks like.
Related Services
Ready to schedule the BowTie Touch?
Same-day and next-day appointments available across the Las Vegas Valley.